3/8 in driver-drill features a compact design at only 7 in long and weighs only 2.4 lb with battery for reduced operator fatigue
Impact driver features a compact design at only 6 in long and weighs only 2.3 lb with battery for reduced operator fatigue
Built-in LED light illuminates the work area
Ergonomically designed handles with rubberized soft grips provide increased comfort
12 V slide battery design enables tool to stand for convenience
12 V compact Lithium-ion 2 Ah battery BL1021B features an integrated LED battery charge level indicator
Part of the expanding 12 V MAX CXT (r) Series, combining performance with great ergonomics in a compact size
Not compatible with 12 V max pod-style tools, batteries and chargers

The 12 volt max cxt (r) lithium-ion cordless two piece combo kit includes a 3/8 inch driver-drill (fd09z), 1/4 inch impact driver (dt03z), two 12 volt max cxt (r) lithium-ion 2 amp hour batteries and a tool case. the 3/8 inch driver-drill delivers power and speed in an ultra-compact size for efficient drilling, driving and fastening. it has two speeds (0 to 450 and 0 to 1700 rpm) and delivers up to 250 in-lb of max torque. the makita 1/4 inch 12 volt max cxt (r) cordless impact driver delivers power and speed in an ultra-compact size for driving and fastening applications. the impact driver has variable speed (0 to 2600 rpm and 0 to 3500 ipm) and delivers up to 970 in-lb max torque. with makita 12 volt max cxt (r) batteries, users get superior balance and ergonomics over pod-style batteries. for longer run time, 12 volt max cxt (r) cordless tools are also compatible with the 12 volt max cxt (r) lithium-ion 4 ah battery (bl1041b, sold separately). 12 volt max cxt (r) lithium-ion batteries are engineered with a battery protection circuit that protects against overloading, over-discharging and over-heating. it's part of the expanding 12 volt max cxt (r) series, combining performance with superior ergonomics in a compact size.

Brushless motor optimizes battery energy use for up to 50% longer run time. Variable speed (0-1,300/0-3,000 RPM and 0-1,600/0-3,900 IPM) for a wide range of fastening applications. Includes: XFD11ZB, XDT15ZB, (2) 18V Compact LXT Lithium-Ion battery, Rapid Optimum charger, and toolbag.
The Makita sub-compact brushless cordless combo kit contains a 1/2 Inch hammer driver-drill, brushless impact driver, two 2 Amp-Hours batteries, battery charger and a tool bag. Driver-drill is 6-15/16 Inch long and the impact driver is 5-5/16 Inch long and the compact design of both the tools make it easy to work in tight spaces. Two-speed setting as well as the percussive setting of the driver-drill delivers a torque rating of 350 in-lb making it easy to drill masonry and brick. Tool is perfect for a variety of fastening and drilling applications. Impact driver operates at two speed settings and delivers a torque rating of 1240 in-lb. Assist mode of the driver drives the tool at low speed until the impact begins thus preventing screw cam-out and cross-threading. Brushless motor eliminates the need of carbon brushes and is controlled electronically to enhance the runtime of the battery. Extreme protection mechanism provides good resistance to dust and water in harsh weather conditions. The batteries can be charged fully in just 25 minutes and the LED indicator displays the battery level. The rapid optimum charger consists of a built-in chip that controls the voltage, current as well as the temperature of the battery. Integrated fan of the charger cools down the battery in case of overheating. Star protection computer control ensures good safety from overloading, over-discharging and overheating.

Drills through mild steel, hardwood and softwood. Features mid-grip design for balance and control, keyless chuck for fast and easy bit changes, two-finger variable speed trigger for control between low to high-speeds. 6 ft L cord, maximum hole diameter in hardwood is 3/8 in, softwood is 3/4 in, 120 V, 50-60 Hz, 2600 rpm no load speed and weighs 3.2 lb. Includes carrying bag.

LATEX GLOVES DISPOSABLE CLEAR

Durable 4mm thick structural foam box wall gives robust structure to the stand alone units; integrated water seal in every unit for protection of contents and long life for your equipment; metal carrier with adjustable foldable brackets allows tailored co nfiguration; central locking mechanism secures the box to the frame; IP65 rating - water and dust resistant. 21 inch length by 13 inch height by 12 inch depth.

The TSTAK? single deep drawer has removable covered cups for organization of small parts and accessories. It also features ball-bearing slides reliable for heavy-duty loads. The flexible TSTAK? platform allows different combinations all units can stack on top of each other and are able to connect with durable side latches.

The TSTAK? system is a flexible platform that allows for many different combinations based on the user's needs. This unit features two drawers and can be stacked on or under other TSTAK? components.

Keep your tools and supplies securely stored with this TSTAK? organizer with clear lid (DWST17805). Its removable compartments (2 large and 5 small) and see-through polycarbonate lid allow you to easily identify and access small parts, accessories and tools.

Set includes 3/8 in drive ratchet, 3/8 in, 6-point sockets of size SAE 3/8 in, 7/16 in, 1/2 in, 9/16 in, 5/8 in, 11/16 in and 3/4 in. Metric 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm and 17 mm. 3/8 in 6-point deep sockets of size SAE 9/16 in, 5/8 in, 11/16 in, 3/4 in and metric 14 mm, 15 mm, 16 mm, 17 mm. 1/4 in 6-point deep sockets of size SAE 11/32 in, 3/8 in, 7/16 in, 1/2 in and metric 10 mm, 11 mm, 12 mm, 13 mm. Includes accessories like 1/4 in drive with 3 in extension, 3/8 in drive with 3 in extension, 3/8 in to 1/4 in reducing adaptor, vinyl grip multi-grip bit driver, 28-piece mm/SAE hex keys, MaxFit bits and (5) nut bit drivers.

We provide a wide range of products to satisfy all houseware and supplies. We are dedicated to give everyone the very best houseware supplies for all home needs with a focus on dependability our client satisfaction and great quality. We provide high-quality modern products to be enjoyed by many clients. Our aim is continuous improvement and user satisfaction through effective implementation and quality of our products.Features Anti-slip design Long panel forging Knurled panel ringsSpecifications Size: 0.5 x 0.56 in. Wrench Style: Open End Weight: 0.32 lbs

Dewalt (r) flex handle breaker bar, 3/8 in drive, chrome vanadium steel, 8 in l

The flare nut wrench has a 15 deg offset open end for an increased range of arc swing in tight spaces. the wrench also has stamped hashmarks on the handle for added gripping points.

Secure lockback design and one hand opening operation that folds to convenient carrying size and a a quick change blademechanism and uses standard utility knife blades. Stainless steel and polished hardwood handle with belt clip. Includes: (1) one blade.

Straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.

Hardened, tempered chrome carbon steel blade lacquered for corrosion protection. Blade has a steel striking cap for use with steel headed hammer. Blade guard can be mounted to wall for storage. Ergonomic, bi-material grip handle is break resistant. Overall length is 9 in.